03/10 Rev. 5.05-00
USER- / SERVICE MANUAL
AP 5.4 Gen II – AP 5.6
Head run length
AP 5.4
AP 5.6
Shows the total "covered distance" of the printhead. The counter is reset with
each calling of the parameter
value: 4 billions.
Roll run length
AP 5.4
AP 5.6
Shows the total "covered distance" of the print roller. The counter is reset with
each calling of the parameter
value: 4 billions.
Cuts on knife
AP 5.4
AP 5.6
Only with mounted and activated cutter.
Shows the number of cuts done by one knife. The counter is reset with each
calling of the parameter
4 billions.
Tot. mat. length
AP 5.4
AP 5.6
Shows the total "covered distance" of the feed roller. In comparison to the
counter Roll run length, this counter is not reset after a roller exchange. Max-
imum value: 4 billions.
Tot. foil length
AP 5.4
AP 5.6
Shows the total "covered distance" of the ribbon roller.
Total cuts
AP 5.4
AP 5.6
Only with mounted and activated cutter.
Shows the number of cuts done by all knifes. In comparison to the counter
Cuts on knife, this counter is not reset after a knife exchange. Maximum val-
ue: 4 billions.
SERVICE FUNCTION > Cutter exchange = yes
SERVICE FUNCTION > Roller exchange = yes
SERVICE FUNCTION > Cutter exchange = yes
Info-Printouts & Parameters
. Maximum
. Maximum
. Maximum value:
98