Easypl. File Log; Log Files Delete; Rfid Stat. Del - Avery Dennison AP5.4 Gen II User And Service Manual

03/10 Rev. 5.05-00
Disabled
All data
Interpreter data
No
Yes
USER- / SERVICE MANUAL
AP 5.4 Gen II – AP 5.6

EasyPl. file log

Easy-Plug file log
AP 5.4 AP 5.6
Only visible, if a SD-card is inserted.
Activating this parameter may slow down the label rate. Therefore disable
the function after error analysis.
Activating this parameter may cause error messages, which may be
difficult to understand. Therefore disable the function after error analysis. If
an error occurs, disable the function and restart the printer.
The file log function is switched off.
All received data, including immediate commands, are written into the log file.
All data is written into the log file, which the Easy-Plug interpreter reads out
of the reception spooler. Immediate commands are not included.

Log files delete

AP 5.4 AP 5.6
Only visible, if a SD-card is inserted.
(Default setting) No function.
Deletes all log files on the inserted SD-card, which fulfil the following con-
ditions:
Filename matches the scheme „EPxxxxxx.log"
xxxxx = number from 1 to 999999, preceding digits filled with „0". Example:
„EP000001.log".
Location: folder \LOGFILES on SD-card
Those conditions are matched by logfiles, which are automatically generated
SPECIAL FUNCTION > EasyPl. file log
by

RFID stat. del.

AP 5.4 AP 5.6
Sets all RFID counters to zero.
PRINT INFO > RFID status
See
.
.
Info-Printouts & Parameters
87