03/10 Rev. 5.05-00
RTS/CTS
XON/XOFF
None
Display
Ignore
> COM3 PORT
USER- / SERVICE MANUAL
AP 5.4 Gen II – AP 5.6
Data synch.
AP 5.4
AP 5.6
Data synchronisation at the serial interface.
Data synchronisation through hardware
Data synchronisation through software
Handshake signals are ignored
Frame error
AP 5.4
AP 5.6
(Default) An error message is displayed, if a framing error is detected while
the printer is receiving serial data.
Framing errors will be ignored, no error messages are displayed.
This menu only appears, if the optional I/O board is installed.
Baud rate
AP 5.4
AP 5.6
With mounted and connected I/O board only.
See parameter
Baud rate
No. of data bits
AP 5.4
AP 5.6
With mounted and connected I/O board only.
See parameter
No. of data bits
Parity
AP 5.4
AP 5.6
With mounted and connected I/O board only.
See parameter
Parity
on page 45.
on page 45.
on page 45.
Info-Printouts & Parameters
41