Cut Mode - Avery Dennison AP5.4 Gen II User And Service Manual

03/10 Rev. 5.05-00
Real 1:1 mode
USER- / SERVICE MANUAL
AP 5.4 Gen II – AP 5.6

Cut mode

AP 5.4 AP 5.6
Only with mounted and activated cutter (
Periph. device
= „Cutter").
This is where the procedure for the label output and cut is defined.
The whole surface of the label is printable. The label is pushed forward to the
cutter for cutting. After the cut, the beginning of the next label is drawn back
under the print head. This reduces the output volume (in relation to a certain
time).
Cutter
1. Printing
2. Printing finished
Avery
3. Feeding
4. Cut and
feed back
[12] Printing process (schematic) in „Real 1:1 Mode".
SYSTEM PARAMETERS >
Printhead
Avery
Avery
Info-Printouts & Parameters
33