Table of Contents
Advertisement
03/10 Rev. 5.05-00
INTERFACE PARA
> EASYPLUGINTERPR
Serial Com1
TCP/IP Socket
LPD Server
USB
Serial Com3
Automatic
Single print job
Mult. print jobs
USER- / SERVICE MANUAL
AP 5.4 Gen II – AP 5.6
Interface parameter
Interface
AP 5.4
AP 5.6
Interface type
This parameter sets the interface, by which the printer will receive data.
Serial interface Com1.
Selection of the type of serial interface is done with parameter
EASYPLUGINTERPR > Serial Port Mode
Only for Ethernet interface (10/100 Base T):
Print data can be sent to the printer via a TCP/IP socket
Print data can be sent to the printer via the LPR/LPD-protocol
USB 1.1 interface
Serial interface Com3.
Only with optional I/O board mounted.
All interfaces are enabled to receive data, but not simultaneously.
Don´t send data to more than one interface at a time.
Except are interfaces, which are being used by an option (e.g. OLV).
Spooler mode
AP 5.4
AP 5.6
The operating mode of the spooler determines whether print series are proc-
essed individually, or whether the spooler can receive print data when print-
ing several series.
Single print series mode (the interface can only receive data after printing the
required number of labels of a single series)
Multiple print series mode (the interface can receive data while the series is
being printed)
Info-Printouts & Parameters
.
38
INTERF. PARAM >
Advertisement
Table of Contents
