03/10 Rev. 5.05-00
> DRIVEASSIGNMENT
None
USB-stick
None
SD card
USER- / SERVICE MANUAL
AP 5.4 Gen II – AP 5.6
For detailed information read the Easy-Plug manual, topic section
Notes, Definitions and Command Overview
Drive C
AP 5.4
AP 5.6
Assigns drive letter C: to the card slot or to the USB port.
C: is not assigned
(Default setting) C: is assigned to the SD card slot.
C: is assigned to the USB host port.
Drive D
AP 5.4
AP 5.6
Assigns drive letter C: to the card slot or to the USB port.
D: is not assigned
D: is assigned to the USB host connector
Info-Printouts & Parameters
General
, chapter „Drive names".
51