Table of Contents
Advertisement
03/10 Rev. 5.05-00
1. Press the Esc button. The cursor jumps to the first character.
2. Press the Cut- or Feed button until the wanted character appears.
3. Type in the next character.
4. Acknowledge the new password by pressing the Online button.
> OPTIONS
Disabled
Serial Com1
Serial Com4
None
Serial Com1
Serial Com3
TCP/IP socket
USER- / SERVICE MANUAL
AP 5.4 Gen II – AP 5.6
DHCP host name
AP 5.4
AP 5.6
Host name of the printer. Default setting: „Device name" + the last 3 figures
of the MAC adress.
Typing in the host name at the operating panel:
Acknowledge by pressing the Online button.
Valid characters: A-Z, a-z, 0-9, -
Alternatively, the password can be typed in using a keyboard, or via the
web server.
RFID Option
AP 5.4
AP 5.6
RFID-Option is not activated (RFID = Radio Frequency Identification).
The RFID reader is connected to Com1 or Com2 internally, what means,
that it does not have to be plugged into the external serial interface
connector.
The RFID reader is connected to Com1.
This setting option is only visible, if no other option is activated at Com1.
The RFID reader is connected to Com4.
This setting option is only visible, if no other option is activated at Com4.
StandAlone Input
AP 5.4
AP 5.6
Defines an interface for data input in standalone mode.
Interfaces are only selectable, if installed and not used by another
function (e. g. as data interface). If
Interface = „Automatic"
, all interfaces besides Com3 are blanked out.
No data input via interface.
Com1 is applied for data input in standalone mode.
Com3 is applied for data input in standalone mode.
TCP/IP socket is applied for data input in standalone mode.
Info-Printouts & Parameters
INTERFACE PARA > EASYPLUGINTERPR >
50
Advertisement
Table of Contents
