Table of Contents
Advertisement
03/10 Rev. 5.05-00
Without adj. par
With adjust para
USER- / SERVICE MANUAL
AP 5.4 Gen II – AP 5.6
Delete spooler
AP 5.4
AP 5.6
Press the Online-key to delete all print jobs contained in the spooler.
Delete Spooler
Clearing . . .
Factory settings
AP 5.4
AP 5.6
All parameters are preset ex works to values specific to each device type.
These factory settings can be restored at any time.
All parameters are then overwritten by the factory settings.
The currently valid settings can be checked using
CAUTION! - All data present in the spooler, including data belonging to an
interrupted print job, is deleted!
Store Parameters
AP 5.4
AP 5.6
Parameter settings are saved in a text file on SD-card (directory FORMATS\).
Considered are also parameters which belong to options, which are not acti-
vated.
(Default) Parameters, which contain device specific settings, are not saved.
(Default file name: SETUP.FOR).
Application example: Transfer of printer settings to another printer (device
specific settings as printhead resistance or sensor settings should not be
overwritten).
Parameters, which contain device specific settings, are also saved. The rel-
evant parameter names are marked with a * in the text file.
(Default file name: SETUPALL.FOR).
Application example: Service
For more information about saving and reading parameter settings read topic
section „Advanced Applications", chapter „Saving and Transferring
parameter settings".
Info-Printouts & Parameters
PRINT INFO > printer status
.
85
Advertisement
Table of Contents
