Head Strobes; Head Temperature; Foil Diameter; Dispensing Cycl - Avery Dennison AP5.4 Gen II User And Service Manual

03/10 Rev. 5.05-00 USER- / SERVICE MANUAL
AP 5.4 Gen II – AP 5.6

Head strobes

AP 5.4 AP 5.6
Shows the counted head strobes, which are a measure for the service life of
the printhead. A strobe is counted for each line in which at least one dot ist
printed. Maximum value: 4 billions.

Head temperature

AP 5.4 AP 5.6
Shows the current printhead temperature in °C.

Foil diameter

AP 5.4 AP 5.6
Shows the calculated foil diameter: A measurement routine calculates the ac-
tual ribbon roll diameter with an exactness of 7.5%.
SYSTEM PARAMETER > Foil end warning
The parameter
foil roll diameter. If the foil roll diameter equals this value, a message appears
on the printer display.
See parameter Foil end warning

Dispensing cycl.

(Dispensing cycles)
AP 5.4 AP 5.6
AP 5.4/5.6: Dispenser version only.
Shows the number of dispensed labels.

Operation time

AP 5.4 AP 5.6
Shows the elapsed time since the last switch-on of the machine.
Info-Printouts & Parameters
can be used to set a critical
on page 68.
99