Avery Dennison AP3.4 User Manual
  1. Manuals
  2. Brands
  3. Avery Dennison Manuals
  4. Label Maker
  5. AP3.4
  6. User manual
Avery Dennison AP3.4 User Manual

Avery Dennison AP3.4 User Manual

Hide thumbs Also See for AP3.4:
Table of Contents

Advertisement

Quick Links

See also: User and Service Manual
11/07 Rev. 4.03-01
Connecting the printer ................................... 2
Overview connectors ................................. 2
Connecting the printer ............................... 3
Operator Controls ......................................... 4
Buttons ...................................................... 4
LED indicators ........................................... 5
Basic Operations ........................................... 6
Performing a Calibration ........................... 7
Performing a Factory Reset ...................... 8
USER MANUAL
AP 3.4
Driver Installation ...........................................9
Selecting a driver .......................................9
Installing the Standard Driver ..................10
Installing the USB Driver ..........................10
Xbar .........................................................11
NiceLabel .................................................11

Advertisement

Table of Contents
loading

Related Manuals for Avery Dennison AP3.4

Summary of Contents for Avery Dennison AP3.4

  • Page 1: Table Of Contents

    11/07 Rev. 4.03-01 USER MANUAL AP 3.4 Commissioning and Operation Connecting the printer ........2 Driver Installation ...........9 Overview connectors ......... 2 Selecting a driver ........9 Connecting the printer ....... 3 Installing the Standard Driver ....10 Operator Controls ......... 4 Installing the USB Driver ......10 Buttons ............

  • Page 2: Commissioning And Operation

    11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation AP 3.4 Connecting the printer Overview connectors Printer connectors (rear side of the device). connector (parallel port) [1C] Centronics For parallel port connection. Mostly it is connected to the printer port of a PC. RS232 connector (serial port) [1D] For serial port connection.

  • Page 3: Connecting The Printer

    11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation AP 3.4 Connecting the printer WARNING! Printer is driven by mains voltage! Touching of live parts can cause life- threatening body currents and burns! Make sure, that the printer is switched off, before connecting the power ca- ble.

  • Page 4: Operator Controls

    11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation AP 3.4 Operator Controls Power switch Operator controls of the printer. Buttons There are three buttons [2], each having two basic functions BUTTON Pressed at normal status Pressed during power-on FEED Feed a label. Perform a self test for configu- ration report.

  • Page 5: Led Indicators

    11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation AP 3.4 PAUSE Button The PAUSE Button stops and restarts the printing process in normal opera- tion. If the PAUSE button is pressed while printing is in progress, the printing stops once current label is completed. Press this button again to restart the printing.

  • Page 6: Basic Operations

    11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation AP 3.4 Basic Operations Printing a Configuration Report 1. Turn off the printer. Press and hold the FEED button. 2. Turn on the power. 3. READY indicator blinks, release FEED button. 4. The printer will perform a self test and print out a configuration report [3]. 5.

  • Page 7: Performing A Calibration

    11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation AP 3.4 Some information in the configuration report are important, please check them after the self test: Item Meaning Printer programming The printer programming language is listed on the language first line of the report . There are two different lan- guages (PPLA and PPLB), Please check for cor- rect version.

  • Page 8: Performing A Factory Reset

    11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation AP 3.4 Performing a Factory Reset If you would like to reset the printer to its factory defaults after certain com- mands have been sent or settings changed: 1. Turn off the printer. 2.

  • Page 9: Driver Installation

    11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation AP 3.4 Driver Installation Selecting a driver Two printer drivers are delivered with the printer, each in different versions for the following operating systems: Windows 95 Windows 98 Windows 2000 Windows NT 4.0 Windows XP The drivers are referred to in the following as „Standard Driver“...

  • Page 10: Installing The Standard Driver

    11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation AP 3.4 Installing the Standard Driver Requires the Adobe Reader to be installed on the computer. Printer Documentation 64-xx / DPM / ALX 92x / TTX 67x / AP 7.t TDI / Options Link information to your product CD „Printer Documentation“.

  • Page 11: Installing The Label Layout Program

    11/07 Rev. 4.03-01 USER MANUAL Commissioning and Operation AP 3.4 Installing the label layout program Xbar Is required for the standalone operation of the printer with a keyboard (option) connected. 1. Insert the CD „Printer Documentation“ (is delivered witih the printer). 2.

Table of Contents