03/10 Rev. 5.05-00
> OPERATION DATA
USER- / SERVICE MANUAL
AP 5.4 Gen II – AP 5.6
Intern. rewinder
(Internal rewinder)
AP 5.4
AP 5.6
„AP 5.4/5.6 peripheral with internal rewinder" only.
Applied PIC version on the internal rewinder motor output stage board.
Serv. operations
AP 5.4
AP 5.6
Shows the num+ber of service operations. The counter is increased by call-
SERVICE FUNCTION > Service = yes
ing the parameter
Headnumber
AP 5.4
AP 5.6
Shows the number of printhead changes. The counter is increased by calling
SERVICE FUNCTION > Cutter exchange = yes
the parameter
lions.
Roll number
AP 5.4
AP 5.6
Shows the number of exchanged print rollers. The counter is increased by
SERVICE FUNCTION > Roller exchange > yes
calling the parameter
4 billions.
Cutter number
AP 5.4
AP 5.6
Only with mounted and activated cutter.
Shows the number of exchanged cutters. The counter is increased by calling
SERVICE FUNCTION > Cutter exchange =yes
the parameter
4 billions.
Info-Printouts & Parameters
. Maximum value: 4 billions.
. Maximum value: 4 bil-
. Maximum value:
. Maximum value:
97