Doorphone Ringing Assignment - Day / Night - Panasonic KX-TD308 Installation Manual

607-608
Doorphone Ringing Assignment - Day /Night
Description
Selection
Default
Programming
Conditions
Feature References
4-126 System Programming
Extension Programming
4 8
l
These programs assign the extensions which will ring when a
doorphone call is received during the day and night modes.
Programmed extensions are also allowed to open the door.
Jack number: 1 through 8, * (-1 / -2),
l
Enable / Disable
l
Jack l-l- Enable; Other jacks - Disable - Day / Night
1. Enter a program address (607 for day or 608 for night).
Display example: 607 DOOR SET DAY
2.
Press NEXT.
Display: Jack NO?+
3. Enter a jack number.
To enter jack number 1, you can also press
To select the second part (-2), press
number.
Display example: #1-1:Enable
4. Keep pressing SELECT until the desired selection is
displayed.
Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
7.
Repeat steps 4 through 6.
8. Press END.
For an explanation of jack numbering, see "Rotation of jack number"
l
on page 4-7.
To assign all jacks to one selection, press the * key in step 3. In this
l
case, the display shows the contents programmed for Jack 1.
One doorphone can be installed for the system.
l
Section 3, Features
Door Opener
Doorphone Call
NEXT.
NEXT after entering a jack
Night Service