Day 1/ Day 2/Night Delayed Ringing; Did Day/Night Ringing - Panasonic DBS 576 Technical Manual

Section 700 - Operation
Inbound calls can be directed to desired normal daytime locations by setting the system into a Day
mode. By having a second day mode (Day 2) alternative call handling is available during day
operation. For instance, during lunch, calls can be directed to an alternative position.
Calls can be directed specific night locations when the system is set to Night mode.
For more information on Day Ringing, see "Day/Night System Mode" on page 3-24.
Hardware Requirements
• N/A
Related Programming
• N/A
Considerations
• N/A

Day 1/ Day 2/Night Delayed Ringing

Delayed Ringing causes an incoming outside call that is unanswered at a primary extension within a
certain period of time, to ring at a designated extension or extensions. Delayed ringing destinations
can be set for Day 1, Day 2 and Night modes. CO Delayed Ringing is also available for hunt group
pilot numbers.
Hardware Requirements
• N/A
Related Programming
• FF2: Trunk Setting (Ringing Assignments)
• FF1-1-02: CO Delayed Timer (Day 1/Day 2/Night)
Considerations
• N/A

DID Day/Night Ringing

Incoming DID calls can be set to ring at day destinations when the system is in day mode and ring at
night destinations when the system is in night mode.
Hardware Requirements
• N/A
Related Programming
• FF1-4: DID Day Destination
• FF1-4: DID Night Destination
Considerations
• N/A
576-51-700 DBS 576 (USA) issued April 2002
Chapter 3. System Features
3-51