Panasonic KX-TD308 Installation Manual page 271

103
Automatic Access Outside Line Assimment
Description
Default
Programming
Conditions
Feature References
4-36
System Programming
4 3 System Programming
l
Assigns the sequence in which outside lines will be accessed when
in Automatic Line Access mode. When a user dials the feature
number for automatic line access (default=9) or presses the L-CO
button, an idle line is searched for in the programmed outside line
order.
Outside line number:
l
123
1.
Enter 103.
Display: 103 AUTO CO
NEXT.
2. Press
Display example': Access:123
the outside lie numbers
3.
Enter
bottom.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new order.
4. Press STORE.
5. Press END.
Automatic Line Access feature works only if the Automatic Route
l
Selection mode is turned off in program [3 121 "ARS Mode".
Section 3, Features
Line Access, Automatic
Line Access, Direct
1 through 3 in desired order
in priority from top to
Line Prefereixe - Outgoing