Outside Line Programming; Outside Line Connection Assignment - Panasonic KX-TD308 Installation Manual

Outside Line Connection Assignment

Description
Selection
Default
Programming
Conditions
Feature References
4-94 System Programming

Outside Line Programming

Used to identify the outside lines which are connected to the
system. This prevents users from originating a call to a line which
is not connected.
Outside line (CO) number: 1 through 3, * ( * =all outside lines)
l
Connect / No Connect
l
All outside lines - Connect
1.
Enter 400.
Display: 400 CO CONNECT
Press NEXT.
2.
Display: CO Line NO?+
Enter an outside line number.
3.
To enter &side line number 1, you can also press
Display example: CO1:Connect
SELECT until the desired selection is
4.
Keep pressing
displayed. -
Press STORE.
5.
To program another outside line, press NEXT or PREV, or
6.
SELECT and the desired outside line number.
7. Repeat steps 4 through 6.
Press END.
8.
To all outside lines to one selection,
assign
l
In this case, the display shows the contents programmed for outside line
1.
Section 3, Features
Line
Outside Connection Assignment
NEXT.
the * key in step 3.
press