Message Waiting - Panasonic KX-TD308 Installation Manual

Message Waiting

Description
Conditions
Programming References
Feature References
Operation References
-User Manual
Features
3-102
The system supports the ability to inform the called party of a
message waiting. The user, with a MESSAGE button, knows there
is a message if the LED ofthe MESSAGE button is lit red. If the
button is not provided or assigned, the called party hears a special
dial tone, when he / she goes off-hook. Pressing the lit MESSAGE
button also means to call back the called party or listen to the
messages which are stored in the mailbox of the Voice Processing
System.
For the proprietary telephone which is provided with a no MESSAGE
l
button, a flexible CO button can be assigned as the MESSAGE button
either by System or Station Programming.
Canceling the message can be performed from the extension sending it
l
or from the extension receiving it.
The system supports a maximum of 16 simultaneous messages.
l
Messages are always left on the original extension. It is not sent to a
l
Call Forwarding or Station Hunting destination.
For standard telephone users, the message waiting ring tone can be
l
generated as notification. The message waiting ring interval time is
programmable by System Programming (default: O=no ring).
The message waiting ring type can be changed in program [990], Field
l
Section 4, System Programming
[OOS] Flexible CO Button Assignment
[ 1001 Flexible Numbering, Message waiting
Station Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . User Manual
Flexible CO Button Assignment - Message Waiting (MESSAGE) Button
Section 3, Features
Dial Tone, Distinctive
DPT Features, Standard Telephone Features
Message Waiting
Features
3
Voice Mail Integration
Voice Mail Integration