Direct Inward System Access (Disa) - Panasonic KX-TD308 Installation Manual

Features

Direct Inward System Access (DISA)

Description
Conditions
Connection References
Programming References
External callers can call extensions in the system. An outgoing
message greets the caller and gives information about how to
access an extension.
An outgoing message can be recorded by the operator or manager.
External callers can also call extensions using a pre-assigned one
digit number
(DISA built-in auto attendant number).
. The following items are required for the DISA feature:
(1) An optional Caller ID / DISA / FAX Detection Card must be
installed.
(2) The Floating Station number of the DISA message should be
assigned as the DIL 1: 1 destination. This assigns the DISA line
and the message accessed by external callers.
(3) The DISA message should be recorded by the operator or
manager.
A DISA call is answered after a ringback tone is returned to the caller
l
after the DISA Delayed Answer Time expires. The caller can dial
during the message.
The floating number of a DISA message may be selected as the
l
destination of Intercept Routing.
attendant numbers. Each number must be one digit.
The DISA built-in auto attendant number may be the same as the first
l
digit of other numbers (extension number, floating number, etc.). To
avoid confusion, the system waits for the second digit for a
preprogrammed amount of time (default: 1 second). If the timer
expires, the system assumes that the first digit is a DISA built-in auto
attendant number.
The outgoing message time is 16 seconds.
l
Section 2, Installation
2.4.2 4-SLT Extension Expansion Card / Caller ID/DIM/FAX Detective
Card Installation
Section 4, System Programming
To enable DISA feature
[ 1001 Flexible Numbering, Outgoing message
D
Features