151-152
ISDN DDI Ringing Assignment — Day / Night
Description
Selection
Default
Programming
Conditions
30
4.3
System Programming
Assigns the destination of each DDI number in the day and night
modes.
• Location number: 000 through 399
• Extension number: 2 to 4 digits /
0 (the same as [990] fields (31) and (32)
All locations – Not stored
1.
Enter a program address (151 for day or 152 for night).
Display example: DDI Ring Day
2.
Press NEXT.
Display: Location No?→
3.
Enter a location number.
To enter location number 000, you can also press NEXT.
Display example: 000:Not Stored
4.
Enter an extension number or 0.
Display example:000:EXT
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To program another location number, press NEXT or
PREV, or SELECT and the desired location number.
7.
Repeat steps 4 through 6.
8.
Press END.
• Each extension number can be 2 to 4 digits, consisting of 0 through 9.
• When "0" is assigned, the incoming DDI number is sent to the
destination assigned in program [990] "System Additional Information,
Fields (31) and (32).
• These programs become available when "DDI" is selected in program
[452]-[453] "ISDN Ring Service Assignment — Day / Night".
assignments)
201