Phantom Extension - Panasonic KX-TD308 Installation Manual

Phantom Extension

Description
Conditions
Programming References
Feature References
Operation References
-User Manual
Features
3-118
Allows the system to route calls to a phantom extension. A call to
a phantom extension arrives at extensions that have the
corresponding Phantom Extension button. A Phantom Extension
button can be assigned by Station Programming.
l
Outside calls - DIL 1:l; DISA; IRNA
Intercom calls - Extension; Transfer
You can call the phantom extension by pressing the Phantom Extension
l
button or by dialing the phantom extension number. If several
extensions have the same phantom extension number, they will ring
simultaneously.
A phantom number must be assigned by System Programming before
l
assigning the Phantom Extension button by Station Programming.
There is a maximum of 16 phantom numbers. Each number has two to
l
four digits, consisting of numbers 0 through 9.
The phantom number cannot be used for feature settings such as Call
l
Forwarding.
The lighting patterns and status of the Phantom Extension button are
l
shown below.
Lighting pattern
Off
Red on
Green rapid flashing
A DSS button can be assigned as the Phantom Extension button so that
l
the operator can use the button for transferring a call.
Section 4, System Programming
[ 1241 Phantom Extension Number Assignment
Station Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . User Manual
Flexible CO Button Assignment - Phantom Extension Button
None
DPT Features, Standard Telephone Features
Phantom Extension
Features
3
Phantom Extension Status
Idle
Calling a phantom extension
Incoming call