Automatic Hold By Co Button - Panasonic KX-TD308 Installation Manual

A
Automatic Concgurationt
Description
Conditions
Programming References
Feature References
Operation References

Automatic Hold by CO Button

Description
Conditions
Programming References
Feature References
Operation References
3-6
Features
The system sends the VPS data which contains the extension
number configuration information. The VPS automatically creates
mailboxes with this data (Quick Setup).
The data is transmitted to the VPS via the lowest jack port.
l
To activate this feature with a KX-TD308 connected to one of the
l
following VP!%, specific programming is required.
1) Assign KX-TD816 as the PBX type for the VPS.
2) The number of digits for the mailbox number and extension number
must be the same (default: the mailbox number-three digits, the
extension number - two digits). If they do not match, reset the VPS
with the reprogrammed number of digits.
No programming required.
None
Not applicable.
This feature, if programmed, allows a proprietary telephone user to
hold a current outside call by pressing another CO button. While
talking to an outside party, pressing a CO button for au incoming or
outgoing call provides au automatic hold for the current call.
If Automatic Hold mode is disabled, pressing a CO button disconnects
l
the current call. (Default=Disable)
It is possible to return to the held party by pressing the corresponding
l
CO button.
Section 4, System Programming
None
Not applicable.
Proprietary Telephone capable Panasonic Voice Processing System (one
that supports digital proprietary telephone integration; e.g. KX-TVSlOO).
Features