Extension-To-Outside Line Call Duration Limit - Panasonic KX-TD308 Installation Manual

Extension-to-Outside Line Call Duration Limit

Description
Selection
Default,
Programming
Conditions
Feature References
System Programming
4-112
4 7 0
This program allows you to restrict the duration of outside calls on
a Class of Service (COS) basis.
1 through 8, * ( *
COS number:
l
Disable
(no limit)
l
All COS - Disable
1.
Enter 502.
Display: 502 EXT-CO TIMER
Press NEXT.
2.
Display: COS NO?+
3. COS number.
Enter a
To enter COS number 1, you can also press
Display example: COSl:Disable
4. SELECT
Keep pressing
displayed.
5. Press STORE.
6.
To program another
SELECT
and the desired COS
7. Repeat steps 4 through 6.
END.
-8. Press
An outside call originated or answered by the programmed extension
l
user is disconnected when the time specified in program [205]
"Extension-to-Outside Line Call Duration Time" expires.
Extensions in limited classes cannot establish an outside-to-outside call,
l
that is, cannot transfer / forward an outside call to another CO line or
perform an Unattended Conference.
To assign all COS to one selection, press the * key in step 3. In this
l
case, the display shows the contents programmed for COS 1.
Program [601] "Class of Service" is used to assign a Class of Service to
l
each extension.
Program [990] "System Additional Information, Field (12)" is used to
l
program Limited Call Duration to he done for outgoing calls only.
Section 3, Features
Call Forwarding - to Outside Line
Call Transfer, Screened - to Outside Line
COS Programming
=all COS)
(limit)
NEXT.
until the desired selection is
COS, NEXT PREV,
press or
number.
Conference, Unattended
Limited Call Duration
or