Panasonic KX-TD308 Installation Manual page 383

System Additional Information (contd)
Explanation for Area 5 (contd)
Field Description
Determines the result when pressing the
FLASH button during an outside call (When
Field 3=0).
outside line.
Terminate: Terminates the outside line and
accesses the intercom. It is
convenient to route the outside
call according to ARS if ARS is
active.
Selects the message waiting ring type: 3
quick rings or 2 normal rings, for standard
telenhones.
Selects the SMDR format for an incoming
call with Caller ID. The caller's number
only or caller's number and name is selected.
Enables or disables the SMDR printout for
RC (when an incoming call occurs) and AN
(when an incoming call is answered).
Selects the result when a call from DISA is
invalid.
Selects the result of pressing "0" (default);
calls operators 1 and 2 at the same time or
Operator 1 first and then Operator 2 if
Operator 1 is busy.
Enables or disables the SMDR printout when
the Timed Reminder starts and the alarm is
not answered.
Explanation for Area 6
Description
(46) Programs whether or not the account code is
printed out in the SMDR.
4-148 System Programming
4.10 Optional Programming
Selection
0 : Terminate
0: 3timesby4Oms
1: 2 times by
0 : <Incoming> +
caller no.
1 : <I> + caller no.
+ name
0 : enable
1 : disable
1: reorder tone is
sent
0 : Operators 1 and
2 simultaneously
1 : Operator 1 first
and then
0 : enable
1 : disable
0 : not printed out
I 1: printed out
References
1 Flash
1 Message Waiting
Station Message
Detail Recording
(SMDR)
SMDR
None
Operator Call
Timed Reminder
1
Account Code
I