Station Hunting Type - Panasonic KX-TD308 Installation Manual

106
Description
Selection
Default
Programming
System Programming
System Programming
4 3
l

Station Hunting Type

Used to enable or disable hunting and set the Station Hunting type
for each extension group. There are six Station Hunting types
available: Circular, Termination, Voice Mail (VM), Automated
Attendant (AA), Ring Group and Uniform Call Distribution (UCD).
If circular hunting is assigned for a group, all of the extensions in
the group are searched until an idle one is found. If termination
hunting is assigned, searching stops at the extension which has the
largest jack number in the group. If VM hunting is assigned, all of
the VM ports of an extension group are searched until an idle one is
found which permits Voice Mail Service. If AA hunting is
assigned, all of the AA ports of an extension group are searched
until an idle one is found which permits AA Service. If Ring
Group is assigned, all of the extensions in the ring group ring
simultaneously. If UCD is assigned, group members are hunted in
a circular way.
Extension group number: 1 through 8, * ( * =all extension
l
Disable (no hunting) / Terminate (termination) / Circular / VM
l
(voice mail) / AA (automated attendant) / RING / UCD
All extension groups - Disable
1. Enter 106.
Display: 106 STATION HUNT
2. Press NEXT.
Display: EXT GRP NO?+
3. Enter an extension group number.
To enter extension
Display example: Groupl:Disable
Keep pressing SELECT until the desired selection is
4.
displayed.
5. Press STORE.
To program another extension group, press NEXT or PREV,
6.
or SELECT and the desired extension group number.
7. Repeat steps 4 through 6.
8. Press END.
group
number 1, you can also press
,
NEXT.