[O&T] Extension Name Set - Panasonic KX-TD308 Installation Manual

Description
Selection
Default
Programming
Conditions
Feature References
4-22
System Programming
4 2 Manager Programming
l
Extension Name Set
Assigns names to the extension numbers programmed in program
Jack number: 1 through 8 (-1 / -2)
l
(-1 = first part, -2 = second part)
Name: 10 characters (max.)
l
All jacks - Not stored
1.
Enter 004.
Display: 004 EXT NAME SET
2.
Press NEXT.
Display: Jack NO?+
3. Enter a jack number.
To enter jack number
To select the second part (-2), press
Display: #l-1:Not Stored
Enter a name.
4.
For entering characters, see Section 4.1.3 "Entering Characters".
To delete the current entry, press
To change the current entry, press
5.
Press STORE.
6.
To program another jack, press
and the desired jack number.
SELECT
7.
Repeat steps 4 through 6.
8.
Press END.
There is a maximum of 16 names. Each name has a maximum of 10
l
characters.
Program [003] "Extension Number Set" is used to assign extension
l
numbers.
. For au explanation of jack numbering, see "Rotation of jack number"
on page 4-7.
Section 3, Features
Display, Call Information
Intercom Calling
Special Features of the KX-T7235 - Extension Dialing
NEXT.
1, you can also press
NEXT
after entering a jack number.
CLEAR.
CLEAR
and enter the new name.
NEXT PREV,
or or