Panasonic KX-TD308 Installation Manual page 339

4 6
Conditions
Feature References
System Programming
4-104
Outside Line Programming
l
Host PBX Access Codes
This program is only required if a host PBX or Centrex line is
l
connected to the system.
There is a maximum of four access codes per outside line. Each code
l
has one or two digits, consisting of 0 through 9, and * .
If conflicting access codes (such as 8 and 81) are stored for the same
l
outside line, the l-digit code (8) only will be in effect.
When the programmed codes are dialed, Automatic Pause Insertion and
l
Toll Restriction are applied to the calls. The programmed pause time
(in program [412] "Pause Time") is automatically inserted after the
access code.
To assign all outside lines to one selection, press the Jc key in step 3.
l
In this case, the display shows the contents programmed for outside line
1.
Section 3, Features
External Feature Access
Host PBX Access
Pause Insertion, Automatic