Vm Status Dtmf Set - Panasonic KX-TD308 Installation Manual

Description
Selection
Default
Programming
4-44 System Programming
4 3 0 System Programming

VM Status DTMF Set

Sets the DTMF signals transmitted to your Voice Processing
System (VPS) to inform the VPS of the VPS ports states quickly:
The following signals are sent to the VPS with the assigned DTMF
signals:
BT (busy tone)
ROT (reorder tone) : This is sent when the dialed number is
DND (DND tone)
Answer
Disconnect
Confirm (confirmation tone) :
FWD VM RBT (FWD to VM ringback tone) :
FWD VM BT (FWD to VM busy tone) :
FWD EXT RBT (FWD to extension ringback tone) :
RBT / BT / ROT / DND / Answer / Disconnect / Confirm /
l
FWD VM RBT / FWD VM BT / FWD EXT RBT
DTMF signal number: 3 digits (max.)
l
RBT - 1; BT - 2; ROT - 3; DND - 4; Answer - 5; Disconnect - ##9
RBT-8
1. Enter 113.
Display: 113 VM DTMF SET
Press NEXT to program ringback tone status.
2.
To program another status; keep pressing
status is displayed.
Display example: RBT
extension.
: This is sent when the called extension is
busy.
invalid.
: This is sent when the other extension has
DND assigned.
: This is sent when the other extension
answers the call.
: This is sent when the other extension
hangs up.
This is sent when the feature number for
"Message Waiting Lamp" is valid.
Not available (reserved).
This is sent when the called extension
has set Call Forwarding to VPS.
Not available (reserved).
NEXT until the desired