Description
Selection
Default
Programming
Conditions
Feature References
System Programming
Outside Line Programming
DTMF Time
An outside line set to DTMF mode in program [402] "Dial Mode
Selection" can have two settings. This program sets the duration of
the DTMF signals sent to an outside line to DTMF mode.
Outside line (CO) number: 1 through 3, * ( * =all outside lines)
l
Time (milliseconds): 80 / 160
l
All outside lines - 80 ms
1.
Enter 404.
Display: 404 DTMF TIME
2.
Press NEXT.
Display: CO Line NO?+
3.
Enter an outside line number.
To enter outside line number 1, you can also press
Display example: COl: 80msec
4.
Keep pressing SELECT until the desired selection is
displayed.
Press STORE.
6.
To program another outside line, press NEXT or PREV, or
SELECT and the desired outside line number.
7.
Repeat steps 4 through 6.
Press END.
To assign all outside lines to one selection, press the * key in step 3.
l
In this case, the display shows the contents programmed for outside line
1.
The DTMP time required is determined by the outside line or PBX line.
l
Section 3, Features
Dial Type Selection
NEXT.