Line Preference - Outgoing (Idle Line / No Line / Prime Line) - Panasonic KX-TD308 Installation Manual

Features
3

Line Preference - Outgoing (Idle Line / No Line / Prime Line)

Description
Conditions
Programming References
Feature References
Operation References
-User Manual
A proprietary telephone user can select a desired outgoing line
preference to originate calls from the following three line
preferences:
(1) Idle Line Preference:
When you go off-hook, you are connected to an idle line.
An idle line is automatically selected from the pre-assigned
lines.
(2) No Line Preference:
No line is selected when you go off-hook. You must select
a line to make a call.
(3) Prime Line Preference:
When you go off-hook, you are connected to the pre-
assigned line. Assign a line as your prime line beforehand.
Setting a new line preference feature cancels the previous setting.
l
To set Prime Line Preference, one prime line is selected from intercom
l
or outside lines.
The outside lines used by users must be connected by programming.
l
To select Idle Line Preference, outside lines available for the user
l
should be programmed. Also outside lines available for Automatic
Line Access should be assigned.
The user can override the Idle / Prime Line Preference temporarily to
l
select a specific line. To select it, press the
(INTERCOM or CO button) before going off-hook or pressing the SP-
PHONE / MONITOR button; or if Full One-Touch Dialing is enabled,
press One-Touch Dialing, DSS, REDIAL, or SAVE button.
Section 4, System Programming
[ 1031 Automatic Access Outside Line Assignment
Station Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . U ser Manual
Flexible CO Button Assignment - Loop-CO (L-CO) Button,
Preferred Line Assignment - Outgoing
Section 3, Features
Outside Line Connection Assignment - Outgoing
Basic Operation
Making Calls
desired line access button
Single-CO (S-CO) Button
Features
L
3-97