Panasonic KX-TD308 Installation Manual page 372

Resource Programming
4 9 0
Serial Interface (RS-232C) Parameters
Conditions
Feature Referenc&
Press NEXT to program word length.
Display example: Word Lengt:8bits
9. Keep pressing SELECT until the desired selection is
displayed.
10. Press STORE.
11. Press NEXT to program parity bit.
Display example: Parity:Mark
12. Keep pressing SELECT until the desired selection is
displayed.
13. Press STORE.
14. Press NEXT to program stop bit.
Display example: Stop Bit:lbit
Keep pressing SELECT until the desired selection is
15.
displayed.
16. Press STORE.
17. Press END.
The following combinations are invalid.
l
Mark
Space
Space
The program address of the out-of-service system port is unacceptable.
l
Section 3, Features
Station Message Detail Recording (SMDR)
8 2
1
8
8 2
I
System Programming
I
4-137