Panasonic KX-TD308 Installation Manual page 331

402
Conditions
Feature References
4-96
System Programming
Outside Line Programming
To assign all lines to one selection, press the Jc key in step 3. In this
l
case, the display shows the contents programmed for outside line 1.
If DTMF is assigned, set the DTMF time of the line in program [404]
l
If pulse or call blocking is assigned, set the pulse speed of the line in
l
program [403] "Pulse Speed Selection", and set the pulse break ratio
and inter-digit pause in program [990] "System Additional Information,
Field (17)" and in "Field (2 1 )", if necessary.
Section 3, Features
Dial 'Ijpe Selection