Emergency Call; End-To-End Dtmf Signaling (Tone Through) - Panasonic KX-TD308 Installation Manual

E
Emergency MI
Description
Conditions
Programming References
Feature References
Operation Reference
-User Manual

End-to-End DTMF Signaling (Tone Through)

Description
Conditions
Programming References
Feature References
Operation References
3-70
Features
Allows the extension user to dial out a pre-assigned emergency
number after seizing the outside line.
Up to ten emergency numbers can be stored. "911" is already stored by
l
the default setting.
Emergency number is allowed to call even in the following cases;
l
mode
Section 4, System Programming
None
DPT Features, Standard Telephone Features

Emergency Call

DTMF signaling is required for access to special network services
offered by some telephone companies. This system allows the
proprietary telephone user to send DTMF signals to the line during
an established call.
If the dial type of the line is assigned to DTMF, Tone Through mode is
l
established automatically after the dialing sequence is finished and the
call is established.
If the dial type of the line is assigned to dial pulse, Tone Through mode
l
is established after the dialing sequence is finished and the " * #'
buttons are pressed (Pulse to Tone Conversion).
This function also applies to extension and conference calls.
l
No programming required.
Section 3, Features
Dial Type Selection
Not applicable.
Features
3
Pulse to Tone Conversion