Table of Contents
Advertisement
System Programming
[130] Phantom Extension Number Assignment
Description
Assigns the phantom extension number.
Selection
• Location number: 01 through 16
• Phantom extension number: 2 to 4 digits
Default
All locations — Not Stored
Programming
1.
Enter 130.
Display: Phantom NO.
2.
Press NEXT.
Display: Location NO?
3.
Enter a location number.
To enter location number 01, you can also press NEXT.
Display example: 01 :Not Stored
4.
Enter a phantom extension number.
To delete the current entry, press CLEAR
To change the current entry, press CLEAR and the new number.
5.
Press STORE.
6.
To program another location, press NEXT or PREV, or SELECT and the desired location
number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• There is a maximum of 16 phantom numbers. Each number has 2 to 4 digits, consisting of
numbers 0 through 9.
• The first 1 or 2 digits of the phantom extension numbers are subject to program
[100] Flexible Numbering, (01) through (16) 1st through 16th hundred extension blocks.
• Phantom extension numbers and other extension numbers should be unique. Double entry
and incompatible entry for these numbers are invalid. Valid entry examples are: 10 and 11,
10 and 110. Invalid entry examples are: 10 and 106, 210 and 21.
98
Programming Guide
Advertisement
Table of Contents
