Phantom Extension - Panasonic KX-TD816CE Installation Manual

3 Features
P
hantom Extension
Description
Conditions
Programming References
Feature References
Operation References
—Added and Changed
Features for
User Manual Vol. 4
Allows the system to route the calls to a phantom extension. A call
to a phantom extension arrives at an extension who has the
corresponding Phantom button. A phantom button can be assigned
by Station Programming.
• Types of calls whose destination can be the phantom extension are:
Outside calls – DIL 1:1; DDI; IRNA; UCD-Overflow
Intercom calls – Extension; Transfer
• You can call the phantom extension by pressing the Phantom button or
by dialing the phantom extension number. If several extensions have
the same phantom extension number, they will ring simultaneously.
• A phantom number must be assigned by System Programming before
assigning the Phantom button by Station Programming.
• There is a maximum of 128 phantom numbers. Each number has two to
four digits, consisting of numbers 0 through 9.
• The phantom number cannot be used for feature settings such as Call
Forwarding.
• The lighting patterns and status of the Phantom button are shown below.
Lighting pattern
Off
Red on
Green rapid flash
• A DSS button can be assigned as the Phantom button so that the
operator can use the button for transferring a call.
Section 4, System Programming — in this manual
[130] Phantom Extension Number Assignment
Station Programming......
Flexible Button Assignment – Phantom Button
None
DPT Features

Phantom Extension

Phantom Extension Status
Idle
Calling a phantom extension
Incoming call
Added and Changed Features for User Manual Vol. 4
P
23