Configuring Overhead Paging; Activity - Altigen MAXCS ACC 6.5 Administration Manual

Configuring Overhead Paging

To configure overhead paging:
1. Connect overhead paging equipment to the audio out jack on a Triton telephony
board.
2. On the System Configuration > Audio Peripheral tab, select Enable Overhead
Paging.
Use the drop-down list to select the board to which the overhead paging is attached.

Activity

The Activity configuration tab is used to configure activity codes that can be displayed
at AltiConsole when the extension user is absent. MaxCommunicator users, MaxAgent
users, and AltiGen IP phone users can select from these activity codes to let others know
where they are when they are away from their desks (meeting, business travel, etc.).
A greeting associated with the activity can be recorded and played to the caller. When
the user changes the Activity, the extension's greeting is also automatically changed to
the greeting associated with this activity.
To access Activity configuration, select System > System Configuration, then click
the Activity tab.
There are a total of nine activity codes; the first six are pre-configured as follows:
1 - System Default (plays the system greeting)
2 - Personal (plays the personal greeting)
3 - Meeting
Chapter 4: System Configuration
MAXCS ACC 6.5 Administration Manual 69