Altigen MAXCS ACC 6.5 Administration Manual page 358

Chapter 25: Enterprise VoIP Network Management
The name of the server appears in the Location Name field, and the name of your
AltiGen product appears in the Switch Type field (MAX Communication Server ACC
or MAX Communication Server ACM). The domain name is blank, and the server
role is currently Stand-alone.
2. Check the Allow this server to be added to domain check box.
3. Enter a Domain Name and a Member Key.
The Member Key will be the security password when the Domain Admin adds this
location into the domain. To reduce the complexity of administration, you can use
the same key for all member systems.
The Enterprise Location Manager window will look something like this:
4. Click Create domain and join as master. A dialog box opens:
5. Enter the IP address of this system. If this system has multiple IP addresses, enter
the one that can communicate with other member servers.
6. Click OK and wait for 5 to 60 seconds, depending on the size and configuration of
the system. The display in the Enterprise Location Manager window changes to show
the name of the VoIP domain and this server as Master.
344
MAXCS ACC 6.5 Administration Manual