Ct-Bus Test Tool; Backup And Restore Utility - Altigen MAXCS ACC 6.5 Administration Manual

Chapter 30: Tools and Applications
PMC chip from host and DSP if T1/E1 board
•
You have the option of testing a single board or testing all boards at the same time.

CT-Bus Test Tool

The CT-Bus Test Tool is a tool that detects one-way connection, cross talk, bad MVIP
cable and static noise problems.
To run the CT-Bus Test Tool:
1. Stop AltiGen Switching Services before running this utility.
2. Launch CT-Bus Test Tool from Start > All Programs > MAX Communication
Server ACC/ACM > Gateway Tools > CT-Bus Test Tool.
3. Click Start to begin the test.
4. At the end of the test, the utility provides pass or fail results.

Backup and Restore Utility

The configuration backup option is turned on by default.
Note:
To back up or restore data, select either
From MaxAdmin: Services > Utilities > System Data Management, or
•
From the Windows Start menu: All Programs > MAX Communication Server
•
ACC/ACM > Utilities > ACC/ACM Backup and Restore.
Figure 1. System Data Management window
The System Data Management window can only be accessed at the primary
Note:
MAXCS system; it is not available from a remote MaxAdmin client.
416
MAXCS ACC 6.5 Administration Manual