Monitor Status, Configure Addresses For Enterprise And Vm Servers - Altigen MAXCS ACC 6.5 Administration Manual

Chapter 26: Redundancy Configuration
Figure 4. Enabling VM server NAT support
1. Check Enable VM Server NAT Support.
2. Check Enable Virtual IP Addresses Support.
3. Click the Advanced button.
4. Double-click the VM Server IP address to configure the address.
Monitor Status, Configure Addresses for Enterprise
and VM Servers
You can monitor the status and configure the addresses of the Enterprise server and the
Voice Mail server. To do so, in MaxAdministrator, select System > Softswitch
Component Management > Applications Server tab.
372
MAXCS ACC 6.5 Administration Manual