Altigen MAXCS ACC 6.5 Administration Manual page 250

Chapter 17: AltiGen IP Phone Configuration
This opens the AltiGen IP Phone Configuration window, where, after setting up an IP
extension, you can set parameters for the extension:
Figure 1. IP Phone Configuration window, General tab
The left side of the IP Phone Configuration window displays all the IP phone extensions
that have been set up in the system. The status "Inactive" means the Enable IP
Extension box is checked for this extension in the Extension Configuration window, but
there is no IP phone logged in to the extension. The extension may be a physical
extension using an analog phone, a MobileExt, or a virtual extension.
After creating the IP extensions, you can set the following parameters on the General
tab:
The Apply To button works with the following parameters: General, TFTP
Note:
Server field (Reset IP Phone and Boot Download options cannot be applied to
multiple extensions), Debug, and Display Workgroup Status (IP 705 and IP
600 phones).
236
MAXCS ACC 6.5 Administration Manual