Extension View Window - Altigen MAXCS ACC 6.5 Administration Manual

Chapter 3: Getting Around MaxAdministrator

Extension View Window

The Extension View window displays the name, location, and status of all assigned
extensions.
...or to open a line properties
window specific to the selected
extension.
Figure 4. Extension View window
Click on any column head to sort by that column. Click again to reverse the sort order.
Double-click any extension number to open the Extension Configuration window for the
selected extension.
The radio button to the left of each extension number is green when the extension is
idle, and red when the extension is not ready or in use. The Location number (for
example, 01:0005) identifies the card logical ID and port (channel) number on the
board. For example, in location 01:0005, the card logical ID is 1 and the port number is
005. If an IP Extension is logged on, the location will also show the IP address.
The Reset button resets the selected extension to the idle status. You'll be asked to
confirm the reset.
You can click the Reset button without selecting an extension, and then type in the
extension number for the extension to reset.
38
MAXCS ACC 6.5 Administration Manual
Right-click an
extension to
display its physical
location...