Altigen MAXCS ACC 6.5 Administration Manual page 157

By default the system grants 60 conference members in a maximum of 40 bridges. You
can change the number to as many as 120 members in a maximum of 40 bridges, and
you can activate other HMCP resources, by double-clicking an HMCP board in Boards
view and then clicking the Board Configuration button to open this dialog box:
You may change the assigned number by entering a different number (up to the number
your system is licensed for and not to exceed the maximum limit for each HMCP board)
in the Assigned to this board fields and clicking Apply.
HMCP Resources—Shows the total number of licensed, total currently assigned, and
the number assigned to this HMCP board for the following resource types:
1. Voice Processing Resources (VPR)
2. Station Conference Members
3. MeetMe Conference Members
4. Agent Supervision Bridges
The maximum number of resources that can be assigned to each HMCP virtual board is
as follows:
G.711 VPR — 1,000
•
G.711/G.723/G.729 VPR — 200
•
Station Conference Members — 120
•
Chapter 11: Board Configuration
If you decrease the
number of HMCP
resources, the system
must be rebooted for the
configuration to take
effect.
If you increase the
number of resources, the
system does not have to
be rebooted.
MAXCS ACC 6.5 Administration Manual 143