Relocating A Global Extension - Altigen MAXCS ACC 6.5 Administration Manual

Chapter 25: Enterprise VoIP Network Management
Ext. System A
403 Global
404 Global
After you change the two extensions to Local, their scope will be:
Ext. System A
403 Local
404 Local
After you make the change, extensions 403 and 404 can be dialed only by the
Note:
users in their own system.

Relocating a Global Extension

The administrator can relocate a global extension from one system to another. In
addition, a user may be allowed to relocate a global extension by using the feature code
#27. To allow a user to use this feature, check the appropriate check box in the
Relocation panel on the Resolve tab. The behavior of this feature differs, depending on
whether an analog or IP phone is being used. (See page 358.)
The check box is available only if a global extension is selected and that extension
Note:
has no conflict.
When a global extension (extension 1001, in this example) is moved from site A to site
B, this is what happens:
The following configurations are replicated from site A to site B:
•
First Name
•
Last Name
•
Password
•
Extension Number
•
DID Number
•
356
MAXCS ACC 6.5 Administration Manual
System B System C
Local Local
Global Local
System B System C
Local Local
Local Local
User can relocate
extension, if
checked
Admin can always
relocate
extension