Chapter 22: Workgroup Configuration
When a call's priority is changed, its priority queue time will be reset to 0 and starts
•
accumulating again. For example, caller A with priority 3 has been waiting in the
queue for 15 minutes and caller B with priority 2 waiting for 10 minutes. When caller
A is promoted to 2, the Priority Queue Time for the caller A is set to 0 and the caller
B will be answered first.
Promoted call priority can be carried to another ACM system over VoIP tie trunk.
•
Creating and Configuring Workgroups
T
he Workgroup Configuration window provides for creating workgroups, setting their
attributes, and assigning group members. To open the Workgroup Configuration
window, select Call Center > Workgroup Configuration.
Figure 1. Workgroup Configuration window, General tab
Overview of Workgroup Configuration Window
These are the tabs in the Workgroup Configuration window:
General—create workgroup pilot numbers, group descriptions, service level
•
threshold and call recording options.
Group Member—add or remove members from workgroups
•
Mail Management—set capacity and features options for extension mailboxes.
•
Notification—set preferences and options for voice mail notifications.
•
Call Handling—set call forwarding, call waiting, and call handling preferences and
•
options.
Queue Management—set queue phrases, overflow routing, queue announcements
•
and queue quit option.
284
MAXCS ACC 6.5 Administration Manual