Mobileextsp Board Overview; Configuring The Mobileextsp Board - Altigen MAXCS ACC 6.5 Administration Manual

Chapter 18: Mobile Extension Configuration

MobileExtSP Board Overview

A simulated physical board (MobileExtSP board) is created when you install the MAXCS
Softswitch. You can configure this board with up to 1000 mobile extension ports. It
handles all systemwide mobile extensions.
Figure 1. MobileExtSP board diagram
T1, PRI, analog, and SIP trunks can be shared for regular incoming and outgoing calls
and mobile trunk connections.
A mobile trunk can be assigned a Group ID and mobile extensions can be assigned to
the appropriate group.
An analog trunk can be dedicated to one mobile extension user. A PRI trunk and SIP
trunk can only be shared by all mobile extension users.

Configuring the MobileExtSP Board

For a Softswitch with a multi-gateway system, your Release 6.0 MobileExt
Note:
configuration files are stored in the gateway in the following directory:
\altiserv\sp\triton. After upgrading to Release 6.5, you need to manually move
these files to the Softswitch machine's \altiserv\sp\MobileSP directory. Then
reboot the Softswitch.
250
MAXCS ACC 6.5 Administration Manual