Altigen MAXCS ACC 6.5 Administration Manual page 86

Chapter 4: System Configuration
#27 – Station Login
#32 – Enter Account Code
#33 – Do Not Disturb
#36 – Call Forwarding
#37 – Remote Call Forwarding
Other Features:
#12 – Language Setting
#38 – Outside Call Blocking
#39 – Operator Offline
#44 – Overhead Paging
#45 – Overhead Paging by Trunk
#46 – Group Paging
#53 – Outgoing Workgroup
#54 – Login Workgroup
#56 – Logout Workgroup
#59 – Workgroup Call Monitor
#66 – Trace Collection
#73 – Silent System Call Park
#90 – READY to Receive Workgroup Call
#91 – NOT READY to Receive Workgroup Call
Session Types:
Specify whether or not to allow an AltiGen SDK session for the extension.
If the extension is an IP extension, #26 / #27 is still available when the phone
Note:
is in the onhook position, even if it is disabled in the extension's feature profile.
To add a Feature Profile
By default, a System feature profile is assigned as 0. To add a new Feature Profile, click
the Add button. The Add Feature Profile dialog box appears, where you can type in a
Name for the feature profile.
Figure 18. Add Feature Profile dialog box
When adding a feature profile, the system will automatically assign the lowest
Note:
available number.
Select the check boxes for the MAXCS feature codes that you want to be associated with
this feature profile, then click Apply.
After the System Administrator creates a Feature Profile, the Feature Profile can be
assigned to a specific extension from the General page of Extension Configuration.
(See "Setting Personal Information" on page 197 for more information on assigning a
feature profile to an extension.)
72
MAXCS ACC 6.5 Administration Manual