Altigen MAXCS ACC 6.5 Administration Manual page 292

Chapter 21: Line Park Configuration
Figure 1. Line Park Configuration window
To set up a Line Park Group:
1. In the Line Park Configuration window, click the Add button below the Groups
list.
2. Enter a name in the Add Line Park dialog box, and click OK.
3. Select line ID numbers from the Non-Member List and click the Add button to add
them to the Member List.
4. To assign extensions to a group, select the group, and then click the Configuration
button below the Member Extensions panel.
278
MAXCS ACC 6.5 Administration Manual