Ct-Bus Test Tool; Altigateway Configuration Tool - Altigen AltiWare ACC 5.1 Administration Manual

CT-Bus Test Tool

The CT-Bus Test Tool is a tool that detects one-way connection, cross talk, bad MVIP
cable and static noise problems.
To run the CT-Bus Test Tool:
1. Stop AltiGen Switching Services before running this utility.
2. Launch CT-Bus Test Tool from Start > All Programs > AltiWare ACC/ACM >
Gateway Tools > CT-Bus Test Tool.
3. Click Start to begin the test.
4. At the end of the test, the utility provides pass or fail results.

AltiGateway Configuration Tool

To open the AltiGateway Configuration tool, choose Start > All Programs > AltiWare
ACC > Gateway. You'll see this dialog box:
Figure 1. AltiGateway Configuration Tool log-in dialog box
Enter the IP address and password of the AltiGateway you want to check on, and click
OK.
The AltiGateway Configuration Tool looks like this:
Figure 2. AltiGateway Configuration Tool
The window displays gateway settings, product version, and a board view for the
gateway, showing each board's name and serial number.
304
AltiWare ACC 5.1 Administration Manual