Pulse Waveform - Agilent Technologies 33220A User Manual

3
Chapter 3 Features and Functions
Pulse Width Modulation (PWM)

Pulse Waveform

• Pulse is the only waveform shape supported for PWM.
• Front-Panel Operation: Press
• Remote Interface Operation:
FUNCtion {PULSe}
You can also use the APPLy command to select the function, frequency,
amplitude, and offset with a single command.
Pulse Period
The range for the pulse period is 200 ns to 2000 s. The default is 1 ms.
• Front-Panel Operation: After selecting the pulse function, press the
Freq softkey again to toggle to the Period softkey. Then use the knob
or numeric keypad to enter the desired pulse period.
• Remote Interface Operation:
PULSe:PERiod {<seconds>|MINimum|MAXimum}
94
.