Table of Contents
Advertisement
Agilent 33220A Web Interface
The Agilent 33220A provides a web interface resident in the instrument.
You can use this interface over the LAN to view and modify the
instrument's I/O configuration. Also, a remote front panel interface is
provided, which allows you to control the instrument over the network.
To access and use the web interface:
1. Establish LAN interface connectivity from your PC to the 33220A.
2. Open your PC's web browser.
3. To launch the web interface enter the IP address of the instrument, or
its fully qualified host name, in the browser address field.
4. Follow the directions in the web interface's online help.
USB Configuration
There are no USB configuration parameters to configure. You can
retrieve the USB ID string (set by the manufacturer) by using the Show
USB Id feature:
• Front panel operation: Press
Show USB Id. The USB string appears in the form:
USB ID = usb0::2391::1031::MY44nnnnnn::INSTR
where "MY44nnnnnn" is the instrument's serial number.
• There is no SCPI command to display the USB ID.
Chapter 3 Features and Functions
Remote Interface Configuration
and press the I/O softkey. Select
3
143
Advertisement
Table of Contents
