Agilent Technologies 33220A User Manual page 152

Agilent 33220A Factory Default Settings
Output Configuration
Function
Frequency
Amplitude / Offset
Output Units
Output Termination
Autorange
Modulation
Carrier (AM, FM, PM, FSK)
Carrier (PWM)
Mod. Waveform (AM)
Mod. Waveform (FM, PM, PWM)
AM Depth
FM Deviation
PM Deviation
FSK Hop Frequency
FSK Rate
PWM Width Deviation
Modulation State
Sweep
Start / Stop Frequency
Sweep Time
Sweep Mode
Sweep State
Burst
Burst Count
Burst Period
Burst Start Phase
Burst State
System-Related Operations
• Power-Down Recall
Display Mode
Error Queue
Stored States, Stored Arbs
Output State
Triggering Operations
Trigger Source
Remote Interface Configuration
• GPIB Address
• DHCP
• Auto IP
• IP Address
• Subnet Mask
• Default Gateway
• DNS Server
• Host Name
• Domain Name
Calibration
Calibration State
Parameters marked with a bullet ( • ) are stored in non-volatile memory.
Chapter 3 Features and Functions
Factory Default Settings
Factory Setting
Sine wave
1 kHz
100 mVpp / 0.000 Vdc
Vpp
50 Ω
On
Factory Setting
1 kHz Sine wave
1 kHz Pulse
100 Hz Sine wave
10 Hz Sine wave
100%
100 Hz
180 degrees
100 Hz
10 Hz
10 µs
Off
Factory Setting
100 Hz / 1 kHz
1 Second
Linear
Off
Factory Setting
1 Cycle
10 ms
0 degrees
Off
Factory Setting
• Disabled
On
Errors are Cleared
No Change
Off
Factory Setting
Internal (Immediate)
Factory Setting
• 10
• On
• On
• 169.254.2.20
• 255.255.0.0
• 0.0.0.0
• 0.0.0.0
• none
• none
Factory Setting
Secured
3
151