Program P0: Play
In this display page you can select and play programs.
All MIDI data in Program P0: Play is transmitted and
received on the Global MIDI Channel "MIDI Channel"
(Global P1: 1–1a).
0–1: Perf. Edit
(Performance Edit)
0–1a
0–1c
0–1d
0–1a: Bank, 10's Hold, Category, Program Number
Bank (Bank Select)
[Bank A...F, G, g(1)...g(9), g(d)]
This is the program bank display.
Use the front panel BANK [A]–[G] keys to select the bank.
Bank G will cycle as follows each time you press the BANK
[G] key.
G→g(1)→g(2)→g(3)→g(4)→g(5)→g(6)→g(7)→g(8)→g(9)→
g(d)→G
Bank F can be selected if you have installed the sepa-
rately sold EXB-MOSS option. When installed, the 128
special EXB-MOSS programs will be available.
The TRITON series provides rewritable banks A, B, C, D,
and E, each containing 128 programs (total 640). As non-
rewritable program areas, it provides banks G (capital pro-
grams for GM2), banks g(1)–g(9) (variation programs), and
bank g(d) (drums). A list of the factory-set programs is
provided in the separate booklet Voice Name List.
A, B
for preset programs
C, D
(for preset programs, and EXB-PCM series programs)
E
(for user programs such as programs that use multi-
samples from Sampling mode)
F
(for EXB-MOSS programs)
G
GM2 capital bank
g(1)–g(9)
GM2 variation banks
g(d)
GM2 drums bank
10's Hold
When you press the front panel [./10's HOLD] key, the dis-
play will indicate
, and the ten's place of the program
number will be fixed. By pressing a numeric key [0]–[9], you
can change the one's place in one keystroke. Use the [
and [
] keys to change the 10's place.
To exit, press the [./10's HOLD] key once again.
1. Program mode
Category
This is the program category display.
You can select programs by category. Press the popup but-
ton, and the "Category/Program Select" menu will appear.
Category/Program Select menu:
0–1
0–1b
The programs of all banks can be organized using up to 16
categories. Use the tabs located at left and right to select a
category, and the programs in the specified category will
appear. Press the OK button to execute, or press the Cancel
button to cancel your selection.
The category for each program can be specified in the "Write
Program" (0–1A) dialog box.
Program Number: name
This is the number and name of the program.
Here you can select the desired program. When this parame-
ter is selected, you can select programs using the front panel
numeric keys [0]–[9], [VALUE] dial, or [
When you press the popup button, the "Bank/Program
Select" menu will appear. This displays programs by bank,
and allows you to select a program.
For details on other ways to select programs such as using a
foot switch or by using MIDI program change messages
from an external MIDI device, refer to p125, 114 in the Basic
Guide.
Bank/Program Select menu:
All programs are grouped and displayed by their bank.
When you use the tabs at left and right to select a bank, the
programs in the selected bank will appear. Press the OK
button to execute, or press the Cancel button to cancel your
selection.
0–1b:
This sets the tempo of the arpeggiator (Link: "Arpeggio
Tempo " 7–1a). The tempo can also be adjusted by the front
panel ARPEGGIATOR [TEMPO] knob. A display of EXT
indicates that the "MIDI Clock" setting (Global P1: 1–1a) has
been set to External MIDI or External PCI/F, and that the
arpeggiator will synchronize to MIDI Clock messages
]
received from an external MIDI device.
[(A...F)0...127: name, (G...g(d))1...128: name]
(Tempo)
[00...15: name]
] [
] keys.
[040...240, EXT]
1
Need help?
Do you have a question about the TRITON proX and is the answer not in the manual?